TITANOS Flowing Agent SCSA 358
-
Payment
-
Origin
China Mainland
-
Minimum Order
15
-
Packing
Pieces
- Contact Now Start Order
- Description
Product Detail
TITANOS flowing agent SCSA 358
Description
Polyacrylate based surface additive for solvent-borne coating systems and ambient curing plastic systems to improve leveling. For semi-polar to polar systems.
Product Data
Composition
Solution of a polyacrylate
Typical Properties
The values indicated in this data sheet describe typical properties and do not constitute specification limits.
Density (20 °C): 0.95 g/ml
Non-volatile matter (10 min., 150 °C): 52 %
Solvents: Alkylbenzenes
Flash point: 47 °C
Applications
Coatings Industry
Special Features and Benefits
The additive is used as an anti-cratering and leveling additive in all solvent-borne coatings. It increases gloss and gives the coatings a long wave effect. It only causes a minor reduction in surface tension and does not negatively influence the recoatability and intercoat adhesion. PBSA-358 does not cause turbidity in clear coats or haze in pigmented systems. The additive is thermally stable.
Recommended Levels
0.1-1 % additive (as supplied) based upon total formulation.
The above recommended levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.
Incorporation and Processing Instructions
The additive can be incorporated during any stage of the production process, including post-addition.
Ambient-curing Plastic Systems
Special Features and Benefits
The additive is used as an anti-cratering and leveling additive in all solvent-borne and solvent-free systems.
It only provides a minor reduction of the surface tension and facilitates the acceptance of spray mist and dust. PBSA-358 does not cause turbidity in non-pigmented systems or haze in pigmented systems.
Recommended Use
The additive is recommended for all ambient curing resin systems such as unsaturated polyester resins and epoxy resins.
Recommended Levels
0.1-0.5 % additive (as supplied) based upon total formulation.
The above recommended levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.
Incorporation and Processing Instructions
The additive can be incorporated during any stage of the production process, including post-addition.
-
TITANOS DISPER 163 15 Pieces / (Min. Order)
-
TITANOS DISPER 161 15 Pieces / (Min. Order)
-
TITANOS Flowing Agent SCSA 333 15 Pieces / (Min. Order)
-
TITANOS Anti Skinning Agent 15 Pieces / (Min. Order)
Favorites
-
QUINDO VIOLET BH-301
15 Pieces / (Min. Order)
-
PERMANENT ORANGE OP-213
15 Pieces / (Min. Order)
-
Permanent Red FGR P.R.112
15 Pieces / (Min. Order)
-
Lithol Rubine BH-4BP P.R.57:1
15 Pieces / (Min. Order)
-
Fast Scarlet 2BM P.R.48:4
15 Pieces / (Min. Order)
-
Fast Scarlet GS PR 48:3
15 Pieces / (Min. Order)
-
Fast Scarlet 259 (PR 48:2)
15 Pieces / (Min. Order)
-
TITANOS Cyclohexyl Ethynyl Carbinol,CAS 78-27-3, EINECS 201-100-9
15 Pieces / (Min. Order)
-
TITANOS DISPER 163
15 Pieces / (Min. Order)
-
TITANOS DISPER 161
15 Pieces / (Min. Order)
-
TITANOS Flowing Agent SCSA 333
15 Pieces / (Min. Order)
-
TITANOS Pigment PY74-OP180(equal to Clariant 2GX-70)
15 Pieces / (Min. Order)
-
TITANOS Pigment PY83-OP206(equal to Clariant HR70)
15 Pieces / (Min. Order)
-
TITANOS Pigment PY83-277(equal to Clariant HR02)
15 Pieces / (Min. Order)
-
TITANOS Pigment PR170-5RK(equal to Clariant F5RK)
15 Pieces / (Min. Order)
-
TITANOS Pigment PR170-3RK(equal to Clariant F3RK)
15 Pieces / (Min. Order)
-
TITANOS Pigment PR170-2RK(equal to Clariant F2RK)
15 Pieces / (Min. Order)
-
TITANOS OPA Calcined Kaolin
15 Pieces / (Min. Order)
-
TITANOS C5 HYDROCARBON RESIN YT-1288S
15 Pieces / (Min. Order)
